View PSPSP1000-12_4192826.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PSPSP1000 Series
1000 Watt Single Output Built-In Active PFC Function AC/DC Switching Power Supply
FEATURES
3 Year Warranty 100% Full Load Burn-In Tested Universal AC Input / Full Range Built-In Remote Sense Function Built-In Remote ON/OFF Control Built-In Active PFC Function, PF > 0.95 Current Sharing up to 2 units or 2000W AC Input Active Surge Current Limiting Built-In Constant Current Limiting Circuit Built-In Active Current Sharing and Parallel Function Short Circuit, Overload, Over Voltage, and Over Temperature Protected SPECIFICATIONS: PSPSP1000 Series
All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range (See Note 6) 90 ~ 264VAC (127 ~ 370VDC) Input Frequency 47 to 63Hz AC Current (typical) 11.2A @ 115VAC 5.6A @ 230VAC Inrush Current (typical) 32A @ 115VAC 63A @ 230VAC Leakage Current < 2mA @ 240VAC Power Factor (typical) 0.96 @ 230VAC 0.96 @ 115VAC and full load Remote ON/OFF Control RC+/RC-: 0 ~ 0.8V = power on; 4 ~ 10V = power off sink current < 20mA OUTPUT SPECIFICATIONS Output Voltage See Table Output Power See Table Voltage Tolerance (See Note 3) 5V output: 6%, 12V output: 3%, 13.5V & 15V outputs: 2%, 24V - 48V outputs: 1% Voltage Adjustment Range See Table Line Regulation 5V output: 0.5%, 12V - 15V outputs: 0.3%, 24V - 48V outputs: 0.2% Load Regulation 5V output: 2.0%, 12V - 48V outputs: 0.5%, Output Current See Table Ripple & Noise (max) (See Note 2) 5V output: 100mVp-p; 12V - 27V outputs: 150mVp-p; 48V output: 200mVp-p Setup, Rise Time 1500ms, 50ms @ 230VAC 1500ms, 50ms @ 115VAC and full load Hold Up Time (typical) 24ms @ 230VAC 24ms @ 115VAC and full load Temperature Coefficient 0.03%/C (0 ~ 50C) PROTECTION 115 ~ 140% rated output power Overload Protection Protection Type: Constant current limiting; recovers automatically after fault condition is removed See Table Over Voltage Protection Protection Type: Shutdown output voltage; re-power on to recover 95C (TSW1) detect on the heatsink of PFC MOSFET 90C (TSW2) detect the winding of output choke Over Temperature Protection Protection Type: Shutdown output voltage; recovers automatically after temperature goes down GENERAL SPECIFICATIONS Efficiency (typical) See Table Withstand Voltage 3000VAC (Input to Output), 1500VAC (Input to FG), 500VAC (Output to FG) Isolation Resistance 100M/500DC (Input to Output, Input to FG, and Output to FG) ENVIRONMENTAL SPECIFICATIONS Working Temperature -10C to +60C (refer to output load derating curve) Storage Temperature -20C to +85C Working Humidity 20 ~ 90% RH non-condensing Storage Humidity 10 ~ 95% RH Vibration 10 ~ 500Hz, 2G 10min./1 cycle, 60min each along X, Y, Z axes. MTBF 59,600 hours min. @ 25C (MIL-HDBK-217F) PHYSICAL SPECIFICATIONS Weight 4700 grams Dimensions 278(L) x 129(W) x 127(H) mm Warranty 3 years SAFETY & EMC Safety Standards UL60950-1, TUV EN60950-1 approved EMI Conduction & Radiation Compliance to EN55022 (CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,-3 EMS Immunity Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, light industry level, criteria A
o
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797
PSPSP1000 Series
1000 Watt Single Output Built-In Active PFC Function AC/DC Switching Power Supply
OUTPUT VOLTAGE / CURRENT RATING CHART
Model Number PSPSP1000-5 PSPSP1000-12 PSPSP1000-13.5 PSPSP1000-15 PSPSP1000-24 PSPSP1000-27 PSPSP1000-48 90 ~ 264 VAC (127 ~ 370 VDC) Input Voltage Output Voltage 5 VDC 12 VDC 13.5 VDC 15 VDC 24 VDC 27VDC 48 VDC Voltage Over Voltage Adjust. Range Protection 4.75 ~ 5.5V 10 ~ 13.2V 12 ~ 15V 13.5 ~ 18V 20 ~ 26.4V 24 ~ 30V 41 ~ 56V 5.75 ~ 6.75V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V 31 ~ 36.5V 57.6 ~ 67.2V Output Current 145A 75A 67A 60A 37.6A 33.6A 19A Output Power Rated Power Peak Load (4) 725W 900W 904.5W 900W 902.4W 907.2W 912W 800W 1000W 1000W 1000W 1000W 1000W 1000W Efficiency 77% 84% 84% 84% 86% 86% 86%
NOTES
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25C ambient temperature. 2. Ripple & noise are measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor. 3. Tolerances include set up tolerance, line regulation, and load regulation. 4. 10% Duty cycle maximum within every 30 seconds (max.). Average output power should not exceed the rated power. 5. The power supply is considered a component, which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 6. Derating may be needed under low input voltages. Please check the derating curve for more details.
BLOCK DIAGRAM
DERATING CURVE
OUTPUT DERATING VS INPUT VOLTAGE
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797
PSPSP1000 Series
1000 Watt Single Output Built-In Active PFC Function AC/DC Switching Power Supply
MECHANICAL DRAWING
Unit: mm
AC INPUT TERMINAL PIN NO. ASSIGNMENT Pin No. Assignment 1 AC/L 2 AC/N 3 FG
DC OUTPUT TERMINAL PIN NO. ASSIGNMENT Pin No. Assignment 1, 3 DC OUTPUT +V 2, 4 DC OUTPUT -V
CONTROL PIN NO. ASSIGNMENT: MOLEX 5559-NP USES 5558 MALE CRIMP TERMINAL Pin No. Assignment Mating Connector Terminal 1 P (Current Share) 2 -S 3 G MOLEX 5556 4 RCFemale Crimp MOLEX 5557-NR 5 NC Terminal Receptacle 6 NC 7 +S 8 RC+
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797

▲Up To Search▲

Price & Availability of PSPSP1000-12

	To Download PSPSP1000-12 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .